The Grenadier Forum

A community driving the extraordinary.

Welcome to Global Grenadiers — the worldwide community for INEOS Grenadier and Quartermaster owners and enthusiasts. Register free to join the conversation. Share your build and adventures, access technical guides, join your regional social group, get help on the trail, and receive our monthly newsletter.

INEOS Agents, Dealers or Commercial vendors — please use the Contact us link at the bottom of the page.

Accessing Door Trim (fix rattles)

Levi

Quartermaster Owner
Local time
1:43 PM
Joined
Jan 18, 2025
Messages
57
Location
Mollymook NSW Australia
Hi all,
Have had a few issues with rattles and creaks etc.
Pushed back on warranty, but sometimes they just don't address it... and the noises drive me nuts (normally kick off at ~1800rpm, resonance frequency on the diesel).

I've isolated a new one the behind the passenger door handle, interior (if i put pressure on the surround of the metal handle is stops).... Has anyone pulled off the trim or handles (internal) to look behind? Couldn't find any resource on this, but feel free to point me the right way if you know!

Thanks in advance.
 
Hi all,
Have had a few issues with rattles and creaks etc.
Pushed back on warranty, but sometimes they just don't address it... and the noises drive me nuts (normally kick off at ~1800rpm, resonance frequency on the diesel).

I've isolated a new one the behind the passenger door handle, interior (if i put pressure on the surround of the metal handle is stops).... Has anyone pulled off the trim or handles (internal) to look behind? Couldn't find any resource on this, but feel free to point me the right way if you know!

Thanks in advance.
Hi @Levi You'll get most of the info you need to remove the door card from this Kaon YouTube. The rattle might be in the card or the door. You'll need to tap around a bit to isolate it.


View: https://youtu.be/3GE4GV3xtds?si=TnJBV8IiK8xe0T29
 
Back
Top Bottom