What's new
The Grenadier Forum

Register a free account today to become a member! Once signed in, you'll be able to contribute to the community by adding your own topics, posts, and connect with other members through your own private inbox! INEOS Agents, Dealers or Commercial vendors please use the contact us link at the bottom of the page.

bracket

  1. parb

    Rival transmission skid plate with agile low range shift bracket

    I have the rival skid plate. Put it on well before agile has any option on the market. I assume it's incompatible with the agile low range shift support bracket since the cross bar from rival doesn't have a spot to mount it to...
  2. Nocrays

    Magnetic microphone and shopping bag bracket Rev 0

    I received a microphone bracket from another Grenadier owner (Dan). The bracket did the job but interfered with a couple of the controls I use. I have developed a similar bracket but with pushing the mic location to the left to clear the Fan and Heated seat controls. This is correct for a...
  3. cdsvt

    Compressor bracket for under second row seats?

    I'm looking to install an ARB compressor under the second row seat in the open space aft of the auxiliary battery. I could've sworn I'd seen one from one of the vendors, but I can seem to find it again. I have an ARB dual compressor that I want to repurpose from another previous build. It is...
  4. C-Mack

    Quick modification to Agile Fire Extinguisher Bracket to fit Element Fire Stick

    Thought I’d share a quick modification to the Agile Offroad Fire Extinguisher Bracket Kit to fit the Element Fire Stick for a discreet install under the Drivers seat. The Agile bracket did all the heavy lifting but for a more custom fit I drilled a couple of extra holes to raise the bracket...
    • C-Mack
    • Thread
    • bracket fire fire extinguisher modification
    • Replies: 1
    • Forum: Interior
  5. WolfBox

    How to Choose Wolfbox Dash Cam OEM Bracket?

    My dear friends, I know some of you have trouble in choosing our OEM bracket for your vehicle. This post is to inform you a little of it. On Wolfbox website, the OEM bracket is listed in Dash Cam -->Dash Cam Accessories -->choose your model -->find OEM bracket. There you can see a compatibility...
  6. C-Mack

    Issues fitting Agile Offroad shift cable retention bracket

    I’m running into some issues fitting the Agile Offroad shift cable retention bracket. There must be some variability between build dates as the bracket does not fit into place and actually interferes with the heat shielding in the transmission tunnel. I’ve had to bend the bracket at a couple...
  7. tangocharlie80

    Red Winch Control Box Bracket Part Number

    This is the part number for the bracket used to secure the Red Winch Control box behind the RH Headlight. It's a complicated but well engineered bracket for mounting the control box very securely in a very awkward location. GRA-7A11-032070
  8. J

    Low Range Shift Cable Support Bracket

    I added the Low Range Shift Cable Support Bracket from Agile Offroad yesterday. I originally ordered after seeing how the factory zip-tied the cable to a wiring bundle. The zip tie is very thin and stiff, so my biggest concern over time was it cutting into the wire harness (I've seen zip ties...
  9. LeonD

    Grenadier Utility Belt Bracket for RotoPax Container

    I was looking for a RotoPax gas container solution for extended off-road travel to give me a little more range. I didn't want to mount it on the roof, the rear, or on the back window molle panels. I had Scott from Scott's Welding and Machine Shop (Virginia) build me a bracket for the utility...
  10. LeonD

    ExtremeAire Compressor Bracket

    I was finally able to find a small machine shop to make a bracket for the ExtremeAire Compressor that I had from another vehicle. I wanted the compressor tucked to the side so as not to take up precious storage space. Upon firing up the compressor, I was surprised that the bracket did not...
  11. AndyT

    Bracket Solutions for Mounting LED Light Pods (Chase Lights)?

    I need the help of the hive mind...I recently purchased a few Morimoto 1Bangers and intended to mount them to my Bison Gear 3/4 roof rack. The issue I am having is that the mounting bracket for the lights come with 10mm (~3/8") bolts but the roof rack uses standard 1x2 extruded aluminum cross...
  12. mji111

    Owl offroad tire relocation bracket

    I really like that this bracket flips the position of the spare and allows left and right movement. Given these are 33's, they would have cleared the small door anyway, but this allows me to center the space on the rear door and display the wheel face. The instructional video on the Owl...
  13. Manzino

    Build Thread LeTech Roof Rack and Headlight Bracket

    Has anyone installed these products on their Grenadier or had any experience with them? I like the look of the round lights and haven't seen a similar product elsewhere.
  14. Stu_Barnes

    Low profile bumper mounted light bracket

    We've been working on a few things in the background, what do you think, too big? Yep, its a low profile no drill light bar bracket pre drilled for multiple light variants, suitable for both UK and ROW spec vehicles.
Back
Top Bottom