Spacers for the $88 Rear door table. Makes it so that the table is just far enough from the door for the cubby panel to be removed and put back on. Has a 'nipple' to center it in the holes. Nothing fancy.
The pictures are of my first attempt that was too tight for the cubby door. The 1st ones were a total of 15mm, the new ones 18mm.
Note that some of that height goes into the door, so it isn't 18mm high.
The pictures are of my first attempt that was too tight for the cubby door. The 1st ones were a total of 15mm, the new ones 18mm.
Note that some of that height goes into the door, so it isn't 18mm high.