Magnetic microphone holder for centre console
Magnet came with the UHF kit I brought from GME | XRS-370C4P
MB207 | Magnetic Microphone Mounting Bracket
You will need M4 20mm self tapping cap screws
Files are set up to print with minimal supports on the right hand side. This is the non visible side for right hand drive Grenadiers.
.STL file
.ZIP | Autodesk Fusion File
Magnet came with the UHF kit I brought from GME | XRS-370C4P
MB207 | Magnetic Microphone Mounting Bracket
You will need M4 20mm self tapping cap screws
Files are set up to print with minimal supports on the right hand side. This is the non visible side for right hand drive Grenadiers.
.STL file
.ZIP | Autodesk Fusion File
